Re: [ts-7000] EEPROM of TS-7200

[Christopher Friedt <>]

I think this refers to an on-chip eeprom (this should be accessible if 
you blast your board using Curtis Monroe's serial blaster utility)

twhk2007 wrote:
> Hello all!
> 
> In the TS-7200 user manaual (ts-72000-manual-rev2.2.pdf, page 28, 
> the section "Interpreting Cirrus A/D Converter"), it mentions that the 
> on-board ADC channels are calibrated. The calibration values are stored 
> in the EEPROM. From the schemaic of TS-7200, I can not find any 
> EEPROM ? Why ?  
>  
> 
> 


 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/ts-7000/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/ts-7000/join
    (Yahoo! ID required)

<*> To change settings via email:
     
    

<*> To unsubscribe from this group, send an email to:
    

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/