[ts-7000] Re: EEPROM of TS-7200

["twhk2007" <>]

Oh ! I see ! Thanks !

--- In  Christopher Friedt <> 
wrote:
>
> I think this refers to an on-chip eeprom (this should be 
accessible if 
> you blast your board using Curtis Monroe's serial blaster utility)
> 
> twhk2007 wrote:
> > Hello all!
> > 
> > In the TS-7200 user manaual (ts-72000-manual-rev2.2.pdf, page 
28, 
> > the section "Interpreting Cirrus A/D Converter"), it mentions 
that the 
> > on-board ADC channels are calibrated. The calibration values are 
stored 
> > in the EEPROM. From the schemaic of TS-7200, I can not find any 
> > EEPROM ? Why ?  
> >  
> > 
> >
>




 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/ts-7000/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/ts-7000/join
    (Yahoo! ID required)

<*> To change settings via email:
     
    

<*> To unsubscribe from this group, send an email to:
    

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/