[ts-7000] NAND flash based vs NOR flash based

["twhk2007" <>]

Hello all !

TS-7200 uses NOR flash while TS-7260 uses NAND flash. I know that the
read time for NOR flash is faster than that of NAND flash. I will use 
the board to do a lot of floating point calculations. Could you anyone 
on the execution speed for these two boards ? Some people mention that 
the code in NAND flash will be transfered to SDRAM during excution, so 
the excution speed of a NAND flash-based board can be faster than NOR 
flash-based board. Is this true for TS-7260 ?

Best regards,
James



 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/ts-7000/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/ts-7000/join
    (Yahoo! ID required)

<*> To change settings via email:
     
    

<*> To unsubscribe from this group, send an email to:
    

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/