[ts-7000] Re: Quite possibly the dumbest question ever from a complete beginner ...

["Yan Seiner" <>]

--- In  "cryptyy" <> wrote:
>
> Hi there.. I am trying to connect my serial port on my win xp (64) pc
> to the 7400 board using the 9440 daughter board.. I have set the
> serial port to 115200 8N1 no flow control but I am not getting any
> output to my screen.. My laptop (beside my PC) is connected to the
> ethernet port on the 7400 and that is working fine. 
> 
> Can someone please tell me where I have gone wrong so I can get on to
> my next road block of booting debian off the sd card... 
> 

Make sure you have no flow control in software.

Also check with anything else than hyperterminal; I've had all sorts
of trouble with that software.

--Yan



 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/ts-7000/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/ts-7000/join
    (Yahoo! ID required)

<*> To change settings via email:
     
    

<*> To unsubscribe from this group, send an email to:
    

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/