Hello,
> I can't believe both systems are broken
Keep in mind it may be a problem with your TS-7260 also.
> so let me give a little
> overview before I send the systems back:
> * TS-7260 with 2.4.26-ts11 pre-installed
> * using COM2 as console
> * On TS-7260 we have next jumpers enabled: JP2, JP3, JP4, JP7, JP9
> * nothing connected besides network cable and serial cable
> * TS-BAT3 plugged in
> * only JP5 is enabled on TS-BAT3
> * 24V supplied on square connector
> On both systems I first tried the modules send by Eddie. Second I've
> tried the peek8 command which gave me both the 0x0 result.
> If I get the confirmation this system should work, we'll take the
> necessary steps to send the systems back.
This should work fine. I've verified it.
//Eddie
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|