Hello Alejandro,
That was one of my first thought and I did just to be sure change the
supplies. But all is the same. Right now it is on a 5 amp regulated
bench power supply running at 10 volts.
Rod
Monday, December 4, 2006, 3:28:20 PM, you wrote:
> On 12/4/06, Angel Rodriguez <> wrote:
>
>> The problem is that the box only starts up 10% of the time. The two
>> LEDs behave as per the manual only now and then. The rest of the time
>> both LEDs come one the red one blinks once on and off and the they
>> both stay on in that state the TS7260 does not respond to ping or ftp
>> or telnet. Then every now and then it behaves just like it should both
>> LEDs turn off and the seismic box begins to do it's job perfectly.
>
> May be the power supply hasn't the current capability needed by your
> system, particulary during the startup. Try with a bigger power
> supply.
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|