Jason,
That was it. /dev/ttyTS0 is now alive and well.
Many thanks,
Ollie
--- Jason Stahls <> wrote:
> Personally I always (when I can) use modprobe that
> way module
> dependencies are satisfied, maybe you're missing one
> of two that
> modprobe would have included for you?
>
> Jason
>
> Ollie Eisman wrote:
> > Has anyone been able to access COM3 (ttyTS0) on a
> 7260
> > board while running Debian? I use the 2.4.26-ts11
> > kernel.
> >
> > I read that I am to load the tsuart module but I
> do
> > not see just "tsuart.o" in
> > /lib/modules/2.4.26-ts11/kernel/drivers/serial so
> I
> > tried two others that are present.
> >
> > When I load the tsuart7260.o module I get this:
> >
> > # insmod tsuart7260
> > Using
> >
>
/lib/modules/2.4.26-ts11/kernel/drivers/serial/tsuart7260.o
> >
>
/lib/modules/2.4.26-ts11/kernel/drivers/serial/tsuart7260.o:
> >
>
/lib/modules/2.4.26-ts11/kernel/drivers/serial/tsuart7260.o:
> > unresolved symbol tsuartGetMEM8
> >
>
/lib/modules/2.4.26-ts11/kernel/drivers/serial/tsuart7260.o:
> >
>
/lib/modules/2.4.26-ts11/kernel/drivers/serial/tsuart7260.o:
> > unresolved symbol tsuart_register_port
> >
>
/lib/modules/2.4.26-ts11/kernel/drivers/serial/tsuart7260.o:
> >
>
/lib/modules/2.4.26-ts11/kernel/drivers/serial/tsuart7260.o:
> > unresolved symbol tsuartPutMEM8
> >
> > If I try tsuart0.o I get:
> >
> > # insmod tsuart0
> > Using
> >
>
/lib/modules/2.4.26-ts11/kernel/drivers/serial/tsuart0.o
> >
> > but I do not see /dev/ttyTS0.
> >
> > /dev/ttyAM0-2 are present and I have used ttyAM0
> and
> > ttyAM1 successfully.
> >
> > Do you have any suggestions?
> >
> > Ollie
>
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|