Re: [ts-7000] COM3 with Debian and 7260

[Jason Stahls <>]

Personally I always (when I can) use modprobe that way module 
dependencies are satisfied, maybe you're missing one of two that 
modprobe would have included for you?

Jason

Ollie Eisman wrote:
> Has anyone been able to access COM3 (ttyTS0) on a 7260
> board while running Debian?  I use the 2.4.26-ts11
> kernel.
>
> I read that I am to load the tsuart module but I do
> not see just "tsuart.o" in
> /lib/modules/2.4.26-ts11/kernel/drivers/serial so I
> tried two others that are present.
>
> When I load the tsuart7260.o module I get this:
>
> # insmod tsuart7260
> Using
> /lib/modules/2.4.26-ts11/kernel/drivers/serial/tsuart7260.o
> /lib/modules/2.4.26-ts11/kernel/drivers/serial/tsuart7260.o:
> /lib/modules/2.4.26-ts11/kernel/drivers/serial/tsuart7260.o:
> unresolved symbol tsuartGetMEM8
> /lib/modules/2.4.26-ts11/kernel/drivers/serial/tsuart7260.o:
> /lib/modules/2.4.26-ts11/kernel/drivers/serial/tsuart7260.o:
> unresolved symbol tsuart_register_port
> /lib/modules/2.4.26-ts11/kernel/drivers/serial/tsuart7260.o:
> /lib/modules/2.4.26-ts11/kernel/drivers/serial/tsuart7260.o:
> unresolved symbol tsuartPutMEM8
>
> If I try tsuart0.o I get:
>
> # insmod tsuart0
> Using
> /lib/modules/2.4.26-ts11/kernel/drivers/serial/tsuart0.o
>
> but I do not see /dev/ttyTS0.  
>
> /dev/ttyAM0-2 are present and I have used ttyAM0 and
> ttyAM1 successfully.
>
> Do you have any suggestions? 
>
> Ollie
>
>
>  
> Yahoo! Groups Links
>
>
>
>
>   


 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/ts-7000/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/ts-7000/join
    (Yahoo! ID required)

<*> To change settings via email:
     
    

<*> To unsubscribe from this group, send an email to:
    

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/