On Tue, 31 Oct 2006, Per-Olof wrote:
> Hello,
>
> I have concerns how to use all the 12 bits on the MAX197 ADC on TS-7200.
> According to the schematics the HBEN is not connected to any port or
> function, and terefore it would not be possible to select to bit 8..11
> form the conversion. Either I can't find any register or writing to
> MAX197 that would enable the uppber bits.
> Is it possible to use all 12 bits, or is the board just printed for 8
> bit (and 8 channel)?
>
I thought Technologics had put out some demo code for accessing the
MAX197 on a ts7200???? Have you checked all the docs?
As I've recently said on another thread on the MAX197 - you can check
out my adc_logger and adio software referenced from my ts7200 webpage.
Jim
----------------------------------------------------------------------------
HomePage: http://www.comp.leeds.ac.uk/jj
TS7200 Page: http://www.comp.leeds.ac.uk/jj/linux/arm-sbc.html
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|