Hi,
Thanks that was the problem.now it works fine.
sonia
--- In "Jesse Off" <> wrote:
>
> --- In "soniathakur3" <soniathakur3@>
> wrote:
> >
> > hi,
> >
> > I am new to embedded linux development and to TS7200 board.
> >
> > Now when i boot the board my minicom session shows the following :
> >
> > >> TS-BOOTROM, Rev 1.05 - built 16:48:05, Mar 1 2005
> > >> Copyright (C) 2005, Technologic Systems
> > >> TS-7200: Rev E0 CPU, Rev C PLD, 32MB SDRAM
> >
> > +No devices on IDE controller 0
> > Ethernet eth0: MAC address 00:d0:69:40:2f:12
> > IP: 192.168.0.50/255.255.255.0, Gateway: 192.168.0.1
> > Default server: 192.168.0.1
> >
> > RedBoot(tm) bootstrap and debug environment [ROMRAM]
> > Non-certified release, version current-TS_5 - built 15:40:53, Mar
> 8 2005
> >
> > Platform: TS-7200 Board (ARM920T) Rev A
> > Copyright (C) 2000, 2001, 2002, 2003, 2004 Red Hat, Inc.
> >
> > RAM: 0x00000000-0x02000000, [0x00044c28-0x01fdd000] available
> > FLASH: 0x60000000 - 0x61000000, 128 blocks of 0x00020000 bytes
> each.
> > == Executing boot script in 1.000 seconds - enter ^C to abort
> > RedBoot> fis load vmlinux
> > RedBoot> exec -c "console=ttyAM0, 115200 root=/dev/mtdblock1"
> ^
> Is that a space between ttyAM0, and 115200? If so, its likely the
> baudrate isn't being set to 115200 since there is not supposed to be
> a space there.
>
> The TS7300 (and all other boards) will not spit out color control
> codes on the serial port consoles. The TS7300 does that only on the
> video console where it is known to be supported.
>
> //Jesse Off
>
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|