--- In "soniathakur3" <>
wrote:
>
> hi,
>
> I am new to embedded linux development and to TS7200 board.
>
> Now when i boot the board my minicom session shows the following :
>
> >> TS-BOOTROM, Rev 1.05 - built 16:48:05, Mar 1 2005
> >> Copyright (C) 2005, Technologic Systems
> >> TS-7200: Rev E0 CPU, Rev C PLD, 32MB SDRAM
>
> +No devices on IDE controller 0
> Ethernet eth0: MAC address 00:d0:69:40:2f:12
> IP: 192.168.0.50/255.255.255.0, Gateway: 192.168.0.1
> Default server: 192.168.0.1
>
> RedBoot(tm) bootstrap and debug environment [ROMRAM]
> Non-certified release, version current-TS_5 - built 15:40:53, Mar
8 2005
>
> Platform: TS-7200 Board (ARM920T) Rev A
> Copyright (C) 2000, 2001, 2002, 2003, 2004 Red Hat, Inc.
>
> RAM: 0x00000000-0x02000000, [0x00044c28-0x01fdd000] available
> FLASH: 0x60000000 - 0x61000000, 128 blocks of 0x00020000 bytes
each.
> == Executing boot script in 1.000 seconds - enter ^C to abort
> RedBoot> fis load vmlinux
> RedBoot> exec -c "console=ttyAM0, 115200 root=/dev/mtdblock1"
^
Is that a space between ttyAM0, and 115200? If so, its likely the
baudrate isn't being set to 115200 since there is not supposed to be
a space there.
The TS7300 (and all other boards) will not spit out color control
codes on the serial port consoles. The TS7300 does that only on the
video console where it is known to be supported.
//Jesse Off
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|