ts-7000
[Top] [All Lists]

[ts-7000] Re: TS7200

To:
Subject: [ts-7000] Re: TS7200
From: "PeterElliot" <>
Date: Fri, 20 Oct 2006 19:53:20 -0000
Hi Sonia,

It looks like the system is putting out color control codes for the 
text display - I've noticed this on my last 7300.

I'm not sure which termianl mode it's using off the top of my head 
(My terminal program - ShadeBlue Indigo - is switched to VT100).

PJE

--- In  "soniathakur3" <> 
wrote:
>
> hi,
> 
> I am new to embedded linux development and to TS7200 board.
> 
> Now when i boot the board my minicom session shows the following :
> 
> >> TS-BOOTROM, Rev 1.05 - built 16:48:05, Mar  1 2005
> >> Copyright (C) 2005, Technologic Systems
> >> TS-7200: Rev E0 CPU, Rev C PLD, 32MB SDRAM
> 
> +No devices on IDE controller 0
> Ethernet eth0: MAC address 00:d0:69:40:2f:12
> IP: 192.168.0.50/255.255.255.0, Gateway: 192.168.0.1
> Default server: 192.168.0.1
> 
> RedBoot(tm) bootstrap and debug environment [ROMRAM]
> Non-certified release, version current-TS_5 - built 15:40:53, Mar  
8 2005
> 
> Platform: TS-7200 Board (ARM920T) Rev A
> Copyright (C) 2000, 2001, 2002, 2003, 2004 Red Hat, Inc.
> 
> RAM: 0x00000000-0x02000000, [0x00044c28-0x01fdd000] available
> FLASH: 0x60000000 - 0x61000000, 128 blocks of 0x00020000 bytes each.
> == Executing boot script in 1.000 seconds - enter ^C to abort
> RedBoot> fis load vmlinux
> RedBoot> exec -c "console=ttyAM0, 115200 root=/dev/mtdblock1"
> Using base address 0x00218000 and length 0x000b388c
> 
&#10;&#65533;.&#46;&#65533;&#65533;.&#46;&#65533;    
&#32;&#65533;&#65533;&#65533;  &#32;&#65533;&#65533; &#32;&#65533; 
&#32;&#65533;&#65533;.&#46;&#65533;
 .&#46;&#65533; &#32;&#65533;&#65533;.&#46;&#65533;&#65533;  &#32;&#65533;8.
  8.&#46;&#65533;&#65533;.  &#32;&#65533;. 
&#32;&#65533; &#32;&#65533;&#65533;&#65533;
  .&#46;&#65533; &#32;&#65533; . &#32;&#65533;.   &#32;&#65533;
>
 .&#46;&#65533; &#32;&#65533; &#32;&#65533;. .T&#84;&#65533;&#65533;+&#43;&#305;
 S<_++_ TS-LINUX/#_+ 7.0
> +_7200 +&#43;&#305;&#65533;:
> 
> 
> I have to start the minicom session again to be able to do anything 
on
> this board.
> Can anybody tell me what the problem is?
> 
> thanks
> Sonia
>





 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/ts-7000/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/ts-7000/join
    (Yahoo! ID required)

<*> To change settings via email:
     
    

<*> To unsubscribe from this group, send an email to:
    

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/
 

<Prev in Thread] Current Thread [Next in Thread>
Admin

Disclaimer: Neither Andrew Taylor nor the University of NSW School of Computer and Engineering take any responsibility for the contents of this archive. It is purely a compilation of material sent by many people to the birding-aus mailing list. It has not been checked for accuracy nor its content verified in any way. If you wish to get material removed from the archive or have other queries about the archive e-mail Andrew Taylor at this address: andrewt@cse.unsw.EDU.AU