Hi Chris,
That seems to solve that issue.
However, the kernel is not booting up as it should. I think that the
kernel crashes after enabling the MMU. What version of the kernel do
you have and what patches have you applied to get it to work?
Appreciate if you could give me some hints on a combination that
works.
Thanks,
Andreas
--- In Christopher Friedt <>
wrote:
>
> Hello Andreas,
>
> I'm not sure of the origin of this glitch, but there appears to be
2
> possible fixes:
>
> 1) change the corresponding machine id in
> $KERNELDIR/arch/arm/tools/mach-types from 673 (0x163) to 355
(0x163).
> Note this will make your kernel unusable (according to Lennart) on
other
> platforms.
>
> 2) modify redboot.bin as obtained from ftp://oz.embeddedarm.com in
the
> file ts7200-8MBflash-update.zip, and overwrite the redboot on your
> board. (this is a bit trickier, but instructions exist in the zip)
>
> "Note: If you are using Redboot.bin from ts7200-8MBflash-
update.zip, you
> can patch the Machine ID (dword) at offset 0xAF0."
> (subj. "2.6 derevo18 patch", 06/20/06)
>
>
> I've only tried the first of these, and that works out reasonably
well.
>
> I'm currently also trying to establish a useful 2.6 kernel, and
have
> applied the yaffs patch to my kernel, so that I could hopefully
read the
> fs, however, I lack the udev init routines, so none of the devices
are
> populated upon boot. Normally, i would fix this problem by booting
into
> an NFS root, but at the moment, I'm in Germany and without my
normal
> network gear.
>
> Good luck!
>
> ~/Chris
>
> andreas.lundeen wrote:
> > Hi,
> > There seems to be a mismatch regarding the supported machine ID
and
> > the reported machine ID.
> > I have kernel 2.6.18 with patch derove20.1. The uncompresssed
kernel
> > is loaded but fails to boot correctly.
> > I have seen other issues on this but I don't seem to be able to
solve
> > this without help. Is there another patch I must have?
> >
> > Thanks,
> > Andreas
> >
> >
> >
> >
> >
> >
> > Yahoo! Groups Links
> >
> >
> >
> >
> >
> >
>
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|