Hello again and thank you for your answer Eddie.
> At least some of the messages are coming from RedBoot... Due to the version
> and date of the kernel I would say that the board you are using may not
> have
> the fixes we added to allow RedBoot to properly deal with bad blocks.
> This is
> probably why the redboot fis list looks strange. An updated version of
> RedBoot
> and probably the E^2 loader is probably in order.
Does this mean that i have to replace the content of the flash to be
certain that it is working properly and if so, how?
I have been reading
"http://www.embeddedarm.com/Manuals/linuxarm-guide-rev2.0.pdf"; and it
seems to me that there is no 'old fashon ROM', only flash and that if
this is erroneously reprogrammed all is lost. Is this correct?
Also, do the three flash parts /dev/mtdblock/(1,2,3) cover the entire
flash memory or just parts that i can freely 'meddle' with? (Not freely
as in 'I can put whatever i want there' but rather freely as in 'I have
the permissions needed to replace whatever is there with something
similar that is already there').
Regards
Per Öberg
--
Per Öberg, Ph.D. Student
Address: Division of Vehicular Systems
Department of Electrical Engineering
Linköpings universitet
581 83 Linköping, SWEDEN
Phone: +46 (0)13-28 23 69
e-mail:
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|