ts-7000
[Top] [All Lists]

Re: [ts-7000] TS-7250 "ECC failed" during Redboot

To:
Subject: Re: [ts-7000] TS-7250 "ECC failed" during Redboot
From: "Eddie Dawydiuk" <>
Date: Tue, 17 Oct 2006 11:21:52 -0700 (MST)
Hello,

> I have to mention that the board seems to be working
> alright but i still think these messages are strange. I have asked the
> support staff but still no answer so I'm hoping for you guys.

Sorry I was out of the office yesterday.

I talked to someone who is more familiar with Reboot than myself and 
paraphrased his response below.

At least some of the messages are coming from RedBoot...  Due to the version 
and date of the kernel I would say that the board you are using may not have 
the fixes we added to allow RedBoot to properly deal with bad blocks. This is 
probably why the redboot fis list looks strange. An updated version of RedBoot 
and probably the E^2 loader is probably in order.

//Eddie


 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/ts-7000/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/ts-7000/join
    (Yahoo! ID required)

<*> To change settings via email:
     
    

<*> To unsubscribe from this group, send an email to:
    

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/
 

<Prev in Thread] Current Thread [Next in Thread>
Admin

Disclaimer: Neither Andrew Taylor nor the University of NSW School of Computer and Engineering take any responsibility for the contents of this archive. It is purely a compilation of material sent by many people to the birding-aus mailing list. It has not been checked for accuracy nor its content verified in any way. If you wish to get material removed from the archive or have other queries about the archive e-mail Andrew Taylor at this address: andrewt@cse.unsw.EDU.AU