ts-7000
[Top] [All Lists]

[ts-7000] Re: [TS-SUPPORT] Manually (re)partitioning the flash on the TS

To: "Kaiwan NB" <>,
Subject: [ts-7000] Re: [TS-SUPPORT] Manually (re)partitioning the flash on the TS-7200
From: "Eddie Dawydiuk" <>
Date: Tue, 17 Oct 2006 10:45:07 -0700 (MST)
Hello,

> I would like to build a complete "custom" Linux on the board (from
> scratch - the kernel and RFS).
> How does one manually re-partition the flash chip on the TS-7200 board?
> Is it done direct via the RedBoot monitor, and if so, how?
> Or mtdutils? if so, how?
>
> Anyone know of any documentation out there?

The partitions are specified in the mtd drivers.

//Eddie


 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/ts-7000/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/ts-7000/join
    (Yahoo! ID required)

<*> To change settings via email:
     
    

<*> To unsubscribe from this group, send an email to:
    

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/
 

<Prev in Thread] Current Thread [Next in Thread>
Admin

Disclaimer: Neither Andrew Taylor nor the University of NSW School of Computer and Engineering take any responsibility for the contents of this archive. It is purely a compilation of material sent by many people to the birding-aus mailing list. It has not been checked for accuracy nor its content verified in any way. If you wish to get material removed from the archive or have other queries about the archive e-mail Andrew Taylor at this address: andrewt@cse.unsw.EDU.AU