[ts-7000] USB wireless problems

["domniveust" <>]

I have a TS-7250 and a PRISMIQ USB wireless adapted.  I've set the
adapter up using the instructions found here.  My problem is that I
cannot connect using the wireless, though it seems to be setup when I
run iwconfig.  It even shows the MAC address of my access point.

ifconfig gives me the following:

eth0      Link encap:Ethernet  HWaddr 00:D0:69:40:50:93
           inet addr:192.168.1.216  Bcast:192.168.1.255 
Mask:255.255.255.0
           UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
           RX packets:1198 errors:0 dropped:0 overruns:0 frame:0
           TX packets:664 errors:0 dropped:0 overruns:0 carrier:0
           collisions:0 txqueuelen:1000
           RX bytes:0 (0.0 B)  TX bytes:0 (0.0 B)
           Interrupt:39

lo        Link encap:Local Loopback
           inet addr:127.0.0.1  Mask:255.0.0.0
           UP LOOPBACK RUNNING  MTU:16436  Metric:1
           RX packets:0 errors:0 dropped:0 overruns:0 frame:0
           TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
           collisions:0 txqueuelen:0
           RX bytes:0 (0.0 B)  TX bytes:0 (0.0 B)

wlan0     Link encap:Ethernet  HWaddr 00:12:0E:10:15:77
           inet addr:192.168.1.219  Bcast:192.168.1.255 
Mask:255.255.255.0
           UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
           RX packets:271 errors:3 dropped:0 overruns:0 frame:3
           TX packets:1 errors:0 dropped:0 overruns:0 carrier:0
           collisions:0 txqueuelen:1000
           RX bytes:82049 (80.1 KiB)  TX bytes:36 (36.0 B)

------------------------------------------------------------------------\
---------------------

iwconfig gives me the following:

lo        no wireless extensions.

eth0      no wireless extensions.

Warning : Device wlan0 has been compiled with a different version
of Wireless Extension than ours (we are using version 10).
Some things may be broken...

wlan0     802.11b/g NIC  ESSID:"AP_main"
           Mode:Managed  Frequency:2.462GHz  Access Point:
00:14:6C:33:CE:68
           Bit Rate:1Mb/s
           RTS thr=2432 B   Fragment thr:off
           Encryption key:off
           Power Management:off
           Link Quality:92/116  Signal level:69/95  Noise level:7/114
           Rx invalid nwid:0  invalid crypt:0  invalid misc:0

I'm assuming my problem is with the different version of wireless
extension.  How do I fix that?

Thanks for any help.

Ben Maderazo







 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/ts-7000/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/ts-7000/join
    (Yahoo! ID required)

<*> To change settings via email:
     
    

<*> To unsubscribe from this group, send an email to:
    

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/