Nevermind. I figured out the problem. I had to "ifconfig eth0 down".
--- In "domniveust" <> wrote:
>
> I have a TS-7250 and a PRISMIQ USB wireless adapted. I've set the
> adapter up using the instructions found here. My problem is that I
> cannot connect using the wireless, though it seems to be setup when I
> run iwconfig. It even shows the MAC address of my access point.
>
> ifconfig gives me the following:
>
> eth0 Link encap:Ethernet HWaddr 00:D0:69:40:50:93
> inet addr:192.168.1.216 Bcast:192.168.1.255
> Mask:255.255.255.0
> UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
> RX packets:1198 errors:0 dropped:0 overruns:0 frame:0
> TX packets:664 errors:0 dropped:0 overruns:0 carrier:0
> collisions:0 txqueuelen:1000
> RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)
> Interrupt:39
>
> lo Link encap:Local Loopback
> inet addr:127.0.0.1 Mask:255.0.0.0
> UP LOOPBACK RUNNING MTU:16436 Metric:1
> RX packets:0 errors:0 dropped:0 overruns:0 frame:0
> TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
> collisions:0 txqueuelen:0
> RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)
>
> wlan0 Link encap:Ethernet HWaddr 00:12:0E:10:15:77
> inet addr:192.168.1.219 Bcast:192.168.1.255
> Mask:255.255.255.0
> UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
> RX packets:271 errors:3 dropped:0 overruns:0 frame:3
> TX packets:1 errors:0 dropped:0 overruns:0 carrier:0
> collisions:0 txqueuelen:1000
> RX bytes:82049 (80.1 KiB) TX bytes:36 (36.0 B)
>
>
------------------------------------------------------------------------\
> ---------------------
>
> iwconfig gives me the following:
>
> lo no wireless extensions.
>
> eth0 no wireless extensions.
>
> Warning : Device wlan0 has been compiled with a different version
> of Wireless Extension than ours (we are using version 10).
> Some things may be broken...
>
> wlan0 802.11b/g NIC ESSID:"AP_main"
> Mode:Managed Frequency:2.462GHz Access Point:
> 00:14:6C:33:CE:68
> Bit Rate:1Mb/s
> RTS thr=2432 B Fragment thr:off
> Encryption key:off
> Power Management:off
> Link Quality:92/116 Signal level:69/95 Noise level:7/114
> Rx invalid nwid:0 invalid crypt:0 invalid misc:0
>
> I'm assuming my problem is with the different version of wireless
> extension. How do I fix that?
>
> Thanks for any help.
>
> Ben Maderazo
>
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|