[ts-7000] ts7300 crunch RTAI

To:
Subject:	[ts-7000] ts7300 crunch RTAI
From:	"Oguz Dilmac" <>
Date:	Tue, 17 Oct 2006 13:50:45 -0000

Hi,

I'm planning to use ts-7300 with RTAI for my multi task real time program.
I need floating point calculations as fast as possible. So I'm
planning to use crunch compilers.

Is there anyone out there who can share experiences using both RTAI
and crunch engine?
I noticed that crunch compiler are a bit problematic and hard to
install. What if I embed my floating point operations as assembly?

All the info,suggestion,etc. will be welcomed :)

Best regards,
Oguz.





 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/ts-7000/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/ts-7000/join
    (Yahoo! ID required)

<*> To change settings via email:
     
    

<*> To unsubscribe from this group, send an email to:
    

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/

<Prev in Thread]	Current Thread	[Next in Thread>
[ts-7000] ts7300 crunch RTAI, Oguz Dilmac <= [ts-7000] Re: ts7300 crunch RTAI, Jesse Off

Previous by Date:	Re: [ts-7000] Manually (re)partitioning the flash on the TS-7200, Jim Jackson
Next by Date:	[ts-7000] USB wireless problems, domniveust
Previous by Thread:	[ts-7000] yaffs2 and corrupted files, marcolamonato
Next by Thread:	[ts-7000] Re: ts7300 crunch RTAI, Jesse Off
Indexes:	[Date] [Thread] [Top] [All Lists]

Disclaimer: Neither Andrew Taylor nor the University of NSW School of Computer and Engineering take any responsibility for the contents of this archive. It is purely a compilation of material sent by many people to the birding-aus mailing list. It has not been checked for accuracy nor its content verified in any way. If you wish to get material removed from the archive or have other queries about the archive e-mail Andrew Taylor at this address: andrewt@cse.unsw.EDU.AU