| To: | |
|---|---|
| Subject: | [ts-7000] TS-7400 GPBUS |
| From: | "jschick333" <> |
| Date: | Mon, 09 Oct 2006 19:37:26 -0000 |
I'd like to attach a 2X24 character LCD to the TS-7400 (the one TS
sells) but I'm short a couple of DIO lines. I was going to drive the
LCD using 11 DIO lines (the same way its done on the TS-7200) but I am
using the GPBUS for some other things and therefore don't have enough
DIOs.
Is it possible to use the GPBUS on the ts-7400 to drive the LCD?
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|
| <Prev in Thread] | Current Thread | [Next in Thread> |
|---|---|---|
| ||
| Previous by Date: | Re: [ts-7000] Redboot, Petr Stetiar |
|---|---|
| Next by Date: | [ts-7000] Re: TS-7400 GPBUS, PeterElliot |
| Previous by Thread: | [ts-7000] Redboot, david.lewin |
| Next by Thread: | [ts-7000] Re: TS-7400 GPBUS, PeterElliot |
| Indexes: | [Date] [Thread] [Top] [All Lists] |
Disclaimer: Neither Andrew Taylor nor the University of NSW School of Computer and Engineering take any responsibility for the contents of this archive. It is purely a compilation of material sent by many people to the birding-aus mailing list. It has not been checked for accuracy nor its content verified in any way. If you wish to get material removed from the archive or have other queries about the archive e-mail Andrew Taylor at this address: andrewt@cse.unsw.EDU.AU