Hi Matt,
I managed to switch off the screen blanking on my TS-7300 by
modifying the video module ts7300fb.o? the source is on the
technologic website (linux24/drivers/video/...). I simply commented
out the line which switched off the sync pulses... My screen now
stays permenently on and I can switch it off from software as needed.
I haven't switched off the console or the blinking cursor, but
noticed that it is only displayed on the first screen page. As you
have 8 screen buffers to play with just use another page in the
screen buffer and the cursor goes away. Switching to the original
page brings it back.
Hope this helps, it was a while ago that I did the driver mod.
Regards,
PJE
--- In "mattsaintdev" <>
wrote:
>
> Following on from my howto not flash the cursor. Where is the
blanking
> enabled / disabled from. The TS7200 switches off TS 7KV screen
output
> after a few mins.
>
> Matt
>
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|