OK, ill go and read ts7300fb.o but how do you go about swapping to
the other screens? im opening the (FB via a /dev/mem handle)
Thanks
Matt
--- In "PeterElliot" <> wrote:
>
> Hi Matt,
>
> I managed to switch off the screen blanking on my TS-7300 by
> modifying the video module ts7300fb.o? the source is on the
> technologic website (linux24/drivers/video/...). I simply commented
> out the line which switched off the sync pulses... My screen now
> stays permenently on and I can switch it off from software as
needed.
>
> I haven't switched off the console or the blinking cursor, but
> noticed that it is only displayed on the first screen page. As you
> have 8 screen buffers to play with just use another page in the
> screen buffer and the cursor goes away. Switching to the original
> page brings it back.
>
> Hope this helps, it was a while ago that I did the driver mod.
>
> Regards,
>
> PJE
>
> --- In "mattsaintdev" <mattsaintdev@>
> wrote:
> >
> > Following on from my howto not flash the cursor. Where is the
> blanking
> > enabled / disabled from. The TS7200 switches off TS 7KV screen
> output
> > after a few mins.
> >
> > Matt
> >
>
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|