[ts-7000] Video TS-7KV Getty Cursor

To:
Subject:	[ts-7000] Video TS-7KV Getty Cursor
From:	"mattsaintdev" <>
Date:	Mon, 07 Aug 2006 11:44:54 -0000

Hi,

in a previous thread i was advised to switch off the Getty on the video 
card as im using it for graphics rather than as a terminal.

Ive edited the inittab file and commended out  as below
# matt vty1:5:respawn:/sbin/getty 38400 vc/0

This worked ok however, the screen still has a cursor flashing away. 
can this be disabled?

Thanks

matt








 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/ts-7000/

<*> To unsubscribe from this group, send an email to:
    

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/

<Prev in Thread]	Current Thread	[Next in Thread>
[ts-7000] Video TS-7KV Getty Cursor, mattsaintdev <= Re: [ts-7000] Video TS-7KV Getty Cursor, Eddie Dawydiuk

Previous by Date:	[ts-7000] Screen Blanking, mattsaintdev
Next by Date:	[ts-7000] Re: Screen Blanking, PeterElliot
Previous by Thread:	[ts-7000] Screen Blanking, mattsaintdev
Next by Thread:	Re: [ts-7000] Video TS-7KV Getty Cursor, Eddie Dawydiuk
Indexes:	[Date] [Thread] [Top] [All Lists]

Disclaimer: Neither Andrew Taylor nor the University of NSW School of Computer and Engineering take any responsibility for the contents of this archive. It is purely a compilation of material sent by many people to the birding-aus mailing list. It has not been checked for accuracy nor its content verified in any way. If you wish to get material removed from the archive or have other queries about the archive e-mail Andrew Taylor at this address: andrewt@cse.unsw.EDU.AU