Hello,
> It appears, that sending the board back for repair is not an option due
> to infernal shipping costs, I'll consider buying replacement board(s)
> later, but it would still be nice to solve, what's wrong with the board
> and what broke it? The application, where board was at, didn't use
> ethernet port. Any suggestions?
It sounds like a hardware problem, without having the board here
to analyze all I can do speculate what may be wrong with your
board.
//Eddie
> Eddie Dawydiuk wrote:
>> Hello,
>>
>> I'll have Frank contact you with an RMA so you can return your board to
>> us for repair.
>>
>> //Eddie
>>
>>
>> On Thu, 1 Jun 2006, Janne Mäntyharju wrote:
>>
>>> Eddie Dawydiuk wrote:
>>>> Hello,
>>>>
>>>>> Ethernet port on my TS-7200 board suddenly stopped working. When I
>>>>> apply
>>>>> power to board, lights at the ethernet port don't show up and
>>>>> attempt to
>>>>> load kernel from http-server causes "Unable to reach host" error. When
>>>>> booting up from flash, following rows show up in kernel messages:
>>>>> ep93xx_eth() version: ep93xx_eth.c: V1.0 09/04/2003 Cirrus Logic
>>>>> Bringing up interface eth0..
>>>>> enable_irq(39) unbalanced from c02c10b8
>>>>> route: SIOC[ADD|DEL]RT: Network is unreachable
>>>>>
>>>>> This problem mostly renders the board unusable, since inittab in flash
>>>>> disables console in serial ports, because ports are used by
>>>>> software in
>>>>> flash.
>>>>>
>>>>> Is there anything than can be done to fix the board?
>>>>
>>>> You can pass the kernel the init=/bin/sh and you should be dropped to a
>>>> shell... Have you modified the network scripts? Have you verified that
>>>> the ethernet cable you are using is working?
>>>>
>>> Thanks for the first advice, I should have thought that. But I haven't
>>> modified networking scripts after the board was put to service, the
>>> ethernet port just stopped working. I tested the cable with another
>>> board, and it was working fine. This really begins to look like a
>>> hardware problem, I was just wondering, how the problem could be
>>> isolated and maybe fixed.
>
>
>
>
> Yahoo! Groups Links
>
>
>
>
>
>
>
------------------------ Yahoo! Groups Sponsor --------------------~-->
You can search right from your browser? It's easy and it's free. See how.
http://us.click.yahoo.com/_7bhrC/NGxNAA/yQLSAA/CFFolB/TM
--------------------------------------------------------------------~->
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|