Hello,
> Ethernet port on my TS-7200 board suddenly stopped working. When I apply
> power to board, lights at the ethernet port don't show up and attempt to
> load kernel from http-server causes "Unable to reach host" error. When
> booting up from flash, following rows show up in kernel messages:
> ep93xx_eth() version: ep93xx_eth.c: V1.0 09/04/2003 Cirrus Logic
> Bringing up interface eth0..
> enable_irq(39) unbalanced from c02c10b8
> route: SIOC[ADD|DEL]RT: Network is unreachable
>
> This problem mostly renders the board unusable, since inittab in flash
> disables console in serial ports, because ports are used by software in
> flash.
>
> Is there anything than can be done to fix the board?
You can pass the kernel the init=/bin/sh and you should be dropped to a
shell... Have you modified the network scripts? Have you verified that
the ethernet cable you are using is working?
//Eddie
------------------------ Yahoo! Groups Sponsor --------------------~-->
Everything you need is one click away. Make Yahoo! your home page now.
http://us.click.yahoo.com/AHchtC/4FxNAA/yQLSAA/CFFolB/TM
--------------------------------------------------------------------~->
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|