Chris:
I tried the the "patch" you posted but it did not fix the issue for me.
Are you sure you have a ts7000 (not a ts7250) that works without a hardware mod?
The reason I am asking is:
See post by curtis regarding watchdog of ts7000 needs hardware mod...
message#3011:
"I tried to serial boot my TS-7200 today. Its watchdog is set for 1 second. So
it's impossible to serial boot it without hardware modifications, (or a CPLD
reprogram).
The EP9301 on my board downloads the serial boot program at 9600bps. It can
only load 960 Bytes in one second. Not even half of the 2048 Bytes needed to
load the SerialBlaster Boot loader.
My board is a TS-7200 Rev B.
-Curtis."
chris dewbery <> wrote: yur_grampa wrote:
> Investigating the
Serialblaster error message:
>
> waiting for '>'
> error!!!found '<'
I also had this problem, maybe the following link / patch will help.
http://groups.yahoo.com/group/ts-7000/message/2867
Chris.
Ring'em or ping'em. Make PC-to-phone calls as low as 1¢/min with Yahoo! Messenger with Voice.
__._,_.___
![]()
SPONSORED LINKS
YAHOO! GROUPS LINKS
- Visit your group "ts-7000" on the web.
- To unsubscribe from this group, send an email to:
=Unsubscribe
- Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.
__,_._,___
|