If you wrote the EEPROM with a SerialBlaster image, as opposed to a TS EEPROM
image, then you need to use the Modified redboot. Some of the functionality
in the TS EEPROM, and the 16k Flash Boot image it loads have been moved to
redboot to skip loading the 16k Flash image.
This could include settings for the timing of the USB (I'm not sure). My focus
on making the SerialBlaster was only to restor a board, so I didn't spend
much time verifying that the burnable EEPROM replacement image and modified
RedBoot set all the registers correctly.
Let me know if you are using the SerialBlaster EEPROM image, If you are I'll
look into this.
-Curtis.
On May 8, 2006 06:37 am, ragin shah wrote:
> Hi all !
> I tried every possible solutions that has been given
> by TS-7200 group members. But, any of them didn't
> work. Still USB problem is not solved.
> I faced this USB problem, after EEPROM got currupted
> in TS-7250 board. But, EEPROM problem has been solved
> using serial blaster utility.
> The only possibility that I can think of is either
> changing in some register values or IRQ values.
> If any one has any idea then please help me out.
>
> __________________________________________________
> Do You Yahoo!?
> Tired of spam? Yahoo! Mail has the best spam protection around
> http://mail.yahoo.com
>
>
>
>
> Yahoo! Groups Links
>
>
>
>
>
>
>
------------------------ Yahoo! Groups Sponsor --------------------~-->
Get to your groups with one click. Know instantly when new email arrives
http://us.click.yahoo.com/.7bhrC/MGxNAA/yQLSAA/CFFolB/TM
--------------------------------------------------------------------~->
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|