Hi !
I tried ts-preboot-ts9.bin (which is of 2K) &
transferd it to EEPROM via serial blaster utility.
But, after this file got tranfered, message like
"Success:.." came & further transmission of
redboot.bin file is stopped.
I mean when I was transfering the EEPROM image of
serial blaster utility , it transfers 'boot.bin' file
in EEPROM & 'redboot.bin' file in Flash.
but ,when I m tranfering 'preboot-ts9.bin' file( from
ftp://ftp.embeddedarm.com.images/) , it transfers only
'preboot-ts9.bin' file. & after transfering, I m not
getting 'RedBoot' prompt on terminal.
So , can u please tell me what could be the promblem?
--- curtis934x <> wrote:
---------------------------------
boot images are here:
ftp://ftp.embeddedarm.com/images/
You want the appropriate
preboot image
Should be 2KB.
-Curtis.
--- In ragin shah
<> wrote:
>
> Hi !
> Thanx for reply.
> I am using serial blaster image in EEPROM.
> So, can u please tell me how to enable USB support
in
> that EEPROM image? or how to write TS-EEPROM image
> instead of serial blaster image ?
>
>
> --- Curtis Monroe <> wrote:
>
>
> ---------------------------------
> If you wrote the EEPROM with a SerialBlaster image,
as
> opposed to a TS EEPROM
> image, then you need to use the Modified redboot.
Some
> of the functionality
> in the TS EEPROM, and the 16k Flash Boot image it
> loads have been moved to
> redboot to skip loading the 16k Flash image.
>
> This could include settings for the timing of the
USB
> (I'm not sure). My focus
> on making the SerialBlaster was only to restor a
> board, so I didn't spend
> much time verifying that the burnable EEPROM
> replacement image and modified
> RedBoot set all the registers correctly.
>
> Let me know if you are using the SerialBlaster
EEPROM
> image, If you are I'll
> look into this.
>
> -Curtis.
>
>
> On May 8, 2006 06:37 am, ragin shah wrote:
> > Hi all !
> > I tried every possible solutions that has been
given
> > by TS-7200 group members. But, any of them didn't
> > work. Still USB problem is not solved.
> > I faced this USB problem, after EEPROM got
currupted
> > in TS-7250 board. But, EEPROM problem has been
> solved
> > using serial blaster utility.
> > The only possibility that I can think of is either
> > changing in some register values or IRQ values.
> > If any one has any idea then please help me out.
> >
> > __________________________________________________
> > Do You Yahoo!?
> > Tired of spam? Yahoo! Mail has the best spam
> protection around
> > http://mail.yahoo.com
> >
> >
> >
> >
> > Yahoo! Groups Links
> >
> >
> >
> >
> >
> >
> >
>
>
> SPONSORED LINKS
>
Linux
> os Hardware
> Arms
> Computer
> internet Computer
> security Computer
> hardware security
>
>
> ---------------------------------
> YAHOO! GROUPS LINKS
>
>
> Visit your group "ts-7000" on the web.
>
> To unsubscribe from this group, send an email
to:
>
>
> Your use of Yahoo! Groups is subject to the
Yahoo!
> Terms of Service.
>
>
> ---------------------------------
>
>
>
>
> __________________________________________________
> Do You Yahoo!?
> Tired of spam? Yahoo! Mail has the best spam
protection around
> http://mail.yahoo.com
>
SPONSORED LINKS
Linux
os Hardware
Arms
Computer
internet Computer
security Computer
hardware security
---------------------------------
YAHOO! GROUPS LINKS
Visit your group "ts-7000" on the web.
To unsubscribe from this group, send an email to:
Your use of Yahoo! Groups is subject to the Yahoo!
Terms of Service.
---------------------------------
Ragin Shah
M.Tech(CSE),
Nirma University,
Ahmedabad.
Mob : 9426419585
__________________________________________________
Do You Yahoo!?
Tired of spam? Yahoo! Mail has the best spam protection around
http://mail.yahoo.com
------------------------ Yahoo! Groups Sponsor --------------------~-->
You can search right from your browser? It's easy and it's free. See how.
http://us.click.yahoo.com/_7bhrC/NGxNAA/yQLSAA/CFFolB/TM
--------------------------------------------------------------------~->
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|