I'm trying to get COM3 working properly on a TS-7260.
Whenever I read or write to the port /dev/ttyTS0, the console is
flooded with messages like this:
tsuart_checkRX
tsuart_try_handleRx
tsuart_checkRX
tsuart_try_handleRx
tsuart_checkRX
tsuart_try_handleRx
tsuart_checkRX
tsuart_try_handleRx
tsuart_checkRX
tsuart_try_handleRx
tsuart_checkRX
First off, it obscures what I'm trying to do, plus it just doesn't
seem normal. Is there some debugging mode that I need to turn off?
Secondly, I'm not sure that I even have the driver installed right. I
accidentally erased it from my 7260 by flashing the default 7250 image
on it, so then I downloaded the TS7260 default tar file and copied
over what appeared to be the relevant files. It seems to boot ok, and
detect the UARTS:
ttyTS0 at MMIO 0x2400000 (irq = 32) is a TSUART
ttyTS1 at MMIO 0x3000000 (irq = 32) is a TSUART
ttyTS2 at MMIO 0x3400000 (irq = 32) is a TSUART
Finally, there appears to be absolutely no documentation on this
driver except the mention that "there exists" this driver, in the
TS-7260 manual.
Please help.
------------------------ Yahoo! Groups Sponsor --------------------~-->
Protect your PC from spy ware with award winning anti spy technology. It's free.
http://us.click.yahoo.com/97bhrC/LGxNAA/yQLSAA/CFFolB/TM
--------------------------------------------------------------------~->
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|