Talking about the case, it is a great case, but you should have it so
that both the front and back stay when you take off the cover so you
could cut a hole (or holes) in the back and route ribbon cables or
other things out the back to connect to I/O, etc. I actually cut a
notch in the top of the cover for the ribbon cables to come out and
attach to the LCD, keypad, and I/O.
Right now, the cover is 4 sides, so, since you can't route things out
the bottom, and the front is tied up with comm ports, power, usb,
there is not place to route I/O cables. Cutting a notch in font of the
cover is good enough for prototypes, but not much else.
It would also be nice to have something that is DIN rail mountable,
and DIN rail mountable terminal blocks that could be connected via
ribbon cables to the onboard I/O.
Well, I know you can't be all things to all people, but the design
could be improved to allow a little flexibility.
Think about leaving the back of the case available (3 sided cover) for
routing cables out on the TS-7300 case.
Is there such a thing as an SD extender cable?
Don.
On 4/24/06, Eddie Dawydiuk <> wrote:
> Hello,
>
>
> > Ok, now for a simple one. If I get the 7260 board with the SD slot,
> > will it still fit in the TS enclosure with a card installed?
>
> Yes the TS-7260 will fit in the TS-ENC720 Enclosure.
> http://www.embeddedarm.com/epc/tsenc720-spec-h.html
>
>
> > Also, is there an option to have the enclosure come with a slot put in
> > it so that the SD card can be inserted and removed from the outside?
>
> This is not currently an option. We would need to modify the current
> enclosure.
>
>
> > Is that even possible given the dimensions of the board and enclosure?
>
> It would be very close, the enclosure would need to be redesigned for this
> to work.
>
> //Eddie
>
>
>
> ________________________________
> YAHOO! GROUPS LINKS
>
>
> Visit your group "ts-7000" on the web.
>
> To unsubscribe from this group, send an email to:
>
>
> Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.
>
> ________________________________
>
--
Dr. Don W. Carr
J. G. Montenegro 2258
Guadalajara, Mexico
+52-333-630-0704
+52-333-836-4500 ext 2930
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|