| To: | |
|---|---|
| Subject: | [ts-7000] 7260 + SD card + enclosure? |
| From: | "Tom Hansen" <> |
| Date: | Mon, 24 Apr 2006 14:53:06 -0000 |
Ok, now for a simple one. If I get the 7260 board with the SD slot,
will it still fit in the TS enclosure with a card installed?
Also, is there an option to have the enclosure come with a slot put in
it so that the SD card can be inserted and removed from the outside?
Is that even possible given the dimensions of the board and enclosure?
Thanks.
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|
| <Prev in Thread] | Current Thread | [Next in Thread> |
|---|---|---|
| ||
| Previous by Date: | [ts-7000] Re: Will MMC card work in SD slot on 7260?, Jesse Off |
|---|---|
| Next by Date: | [ts-7000] Re: Voice recognition, Yan Seiner |
| Previous by Thread: | [ts-7000] Set group ID bit and directories with YAFFS, Tom Hansen |
| Next by Thread: | Re: [ts-7000] 7260 + SD card + enclosure?, Eddie Dawydiuk |
| Indexes: | [Date] [Thread] [Top] [All Lists] |
Disclaimer: Neither Andrew Taylor nor the University of NSW School of Computer and Engineering take any responsibility for the contents of this archive. It is purely a compilation of material sent by many people to the birding-aus mailing list. It has not been checked for accuracy nor its content verified in any way. If you wish to get material removed from the archive or have other queries about the archive e-mail Andrew Taylor at this address: andrewt@cse.unsw.EDU.AU