| To: | |
|---|---|
| Subject: | Re: [ts-7000] 7260 + SD card + enclosure? |
| From: | "Eddie Dawydiuk" <> |
| Date: | Mon, 24 Apr 2006 11:45:10 -0700 (MST) |
Hello, > Ok, now for a simple one. If I get the 7260 board with the SD slot, > will it still fit in the TS enclosure with a card installed? Yes the TS-7260 will fit in the TS-ENC720 Enclosure. http://www.embeddedarm.com/epc/tsenc720-spec-h.html > Also, is there an option to have the enclosure come with a slot put in > it so that the SD card can be inserted and removed from the outside? This is not currently an option. We would need to modify the current enclosure. > Is that even possible given the dimensions of the board and enclosure? It would be very close, the enclosure would need to be redesigned for this to work. //Eddie Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/ts-7000/ <*> To unsubscribe from this group, send an email to: <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/ |
| <Prev in Thread] | Current Thread | [Next in Thread> |
|---|---|---|
| ||
| Previous by Date: | Re: [ts-7000] Re: Will MMC card work in SD slot on 7260?, Bob Lees |
|---|---|
| Next by Date: | Re: [ts-7000] 7260 + SD card + enclosure?, Don W. Carr |
| Previous by Thread: | [ts-7000] 7260 + SD card + enclosure?, Tom Hansen |
| Next by Thread: | Re: [ts-7000] 7260 + SD card + enclosure?, Don W. Carr |
| Indexes: | [Date] [Thread] [Top] [All Lists] |
Disclaimer: Neither Andrew Taylor nor the University of NSW School of Computer and Engineering take any responsibility for the contents of this archive. It is purely a compilation of material sent by many people to the birding-aus mailing list. It has not been checked for accuracy nor its content verified in any way. If you wish to get material removed from the archive or have other queries about the archive e-mail Andrew Taylor at this address: andrewt@cse.unsw.EDU.AU