I have used Linux before, and I know how to use make. However I cant
find anything needed to get make to compile the toolchain.
--- In "Don W. Carr" <> wrote:
>
> You should log into the yahoo groups website, and then you can search
all of
> the old messages. On the LCD and keypad, they have example code at the
TS
> website, though I am working on an api that is more friendly to use
and does
> not expose you to all of the details that you don't need to know.
>
> And, you should use Linux for the development platfom. I can't help
you much
> with Windows since I have not used it for over 4 years, but you will
> probably only have to set a path to the exes, and learn how to use
gcc,
> which, for the arm is called "arm-linux-gcc". You should also learn to
use
> "make".
>
> You can also log in via telnet. The default IP should be 192.168.0.50.
Set
> your XP box to a fixed IP such as 192.168.0.5, and connect the two
with a
> crossover cable.
>
> Not sure what is happening with your terminal, you probably need to
set the
> parameters correctly.
>
> Don.
>
> On 4/19/06, psych2009 <> wrote:
> >
> > I recently purchased a TS-7260 and have a few questions that I am
having
> > trouble finding the answer to, I am new to not only this board but
using
> > robotics in general. I am using Hyper Terminal on Windows XP to
comunicate
> > with the board, and I have installed cygwin for the toolchain to
work on
> > Windows. However, I can connect to the board and all of the start
up
> > messages appear on screen and it gets to the login prompt. Though
when I
> > try to type in root to log in it types very slowly, and when I press
enter
> > to log in it doesn't log in the cursor just goes to the start of the
line.
> >
> > Also, I am trying to get the toolchain to work and I have un-tared
it
> > under cygwin, though I don't know how to use the applications or
what
> > applications I need to run for the toolchain. I am also wondering
if there
> > is any sample code to check that the LCD montior and Keypad work,
and if so
> > where would I get them and how would I get them to work.
> >
> > Any help would be greatly appreciated.
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|