Re: [ts-7000] WORKING WITH FLASH N EEPROM ON 7250

To:
Subject:	Re: [ts-7000] WORKING WITH FLASH N EEPROM ON 7250
From:	Curtis Monroe <>
Date:	Thu, 2 Mar 2006 10:23:24 -0500

download and read the EEPROM datasheet.

download and read a NAND Flash datasheet to see how it functions.

-Curtis.


On March 2, 2006 08:40 am, shanewarne777 wrote:
> Dear all,
> 
> i am working with ts-7250.. i have the following queries..
> 
> THE EEPROM IS CONNECTED VIA SPI, THEN WHY DOESN'T IT HAVE AN SPI_FRAME
> SIGNAL
> 
> THERE IS NO ADDRESS BUS CONNECTED TO THE FLASH, SO HOW CAN ONE ADREESS
> A PARTICULAR MEMORY LOCATION
> IS IT THAT THERE IS A POINTER AND IT MOVES AUTOMATICALLY
> 
> --WARNEY
> 
> 
> 
> 
> 
> 
> 
> 
> 
>  
> Yahoo! Groups Links
> 
> 
> 
>  
> 
> 
> 


 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/ts-7000/

<*> To unsubscribe from this group, send an email to:
    

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/

<Prev in Thread]	Current Thread	[Next in Thread>
[ts-7000] WORKING WITH FLASH N EEPROM ON 7250, shanewarne777 Re: [ts-7000] WORKING WITH FLASH N EEPROM ON 7250, Curtis Monroe <=

Previous by Date:	Re: [ts-7000] processor clk control, cpld programming, Curtis Monroe
Next by Date:	Re: [ts-7000] block structure of CPLD, Curtis Monroe
Previous by Thread:	[ts-7000] WORKING WITH FLASH N EEPROM ON 7250, shanewarne777
Next by Thread:	[ts-7000] PC/104 -- MEM/IO Strobes & Clock, Tarun Tuli
Indexes:	[Date] [Thread] [Top] [All Lists]

Disclaimer: Neither Andrew Taylor nor the University of NSW School of Computer and Engineering take any responsibility for the contents of this archive. It is purely a compilation of material sent by many people to the birding-aus mailing list. It has not been checked for accuracy nor its content verified in any way. If you wish to get material removed from the archive or have other queries about the archive e-mail Andrew Taylor at this address: andrewt@cse.unsw.EDU.AU