[ts-7000] WORKING WITH FLASH N EEPROM ON 7250

ts-7000

[ts-7000] WORKING WITH FLASH N EEPROM ON 7250

To:
Subject:	[ts-7000] WORKING WITH FLASH N EEPROM ON 7250
From:	"shanewarne777" <>
Date:	Thu, 02 Mar 2006 13:40:48 -0000

Dear all,

i am working with ts-7250.. i have the following queries..

THE EEPROM IS CONNECTED VIA SPI, THEN WHY DOESN'T IT HAVE AN SPI_FRAME
SIGNAL

THERE IS NO ADDRESS BUS CONNECTED TO THE FLASH, SO HOW CAN ONE ADREESS
A PARTICULAR MEMORY LOCATION
IS IT THAT THERE IS A POINTER AND IT MOVES AUTOMATICALLY

--WARNEY









 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/ts-7000/

<*> To unsubscribe from this group, send an email to:
    

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/

[More with this subject...]

<Prev in Thread]	Current Thread	[Next in Thread>
[ts-7000] WORKING WITH FLASH N EEPROM ON 7250, shanewarne777 <= Re: [ts-7000] WORKING WITH FLASH N EEPROM ON 7250, Curtis Monroe

Previous by Date:	Re: [ts-7000] processor clk control, cpld programming, Jim Jackson
Next by Date:	Re: [ts-7000] Fwd: boot loader location, Curtis Monroe
Previous by Thread:	[ts-7000] block structure of CPLD, anand bhavnani
Next by Thread:	Re: [ts-7000] WORKING WITH FLASH N EEPROM ON 7250, Curtis Monroe
Indexes:	[Date] [Thread] [Top] [All Lists]

Admin

Disclaimer: Neither Andrew Taylor nor the University of NSW School of Computer and Engineering take any responsibility for the contents of this archive. It is purely a compilation of material sent by many people to the birding-aus mailing list. It has not been checked for accuracy nor its content verified in any way. If you wish to get material removed from the archive or have other queries about the archive e-mail Andrew Taylor at this address: andrewt@cse.unsw.EDU.AU