[ts-7000] PC/104 -- MEM/IO Strobes & Clock

ts-7000

[ts-7000] PC/104 -- MEM/IO Strobes & Clock

To:
Subject:	[ts-7000] PC/104 -- MEM/IO Strobes & Clock
From:	"Tarun Tuli" <>
Date:	Thu, 02 Mar 2006 22:11:11 -0000

Hi, Im working on building a PC/104 expansion board for our TS-7250's.

I'm having problems finding information on what the implementation 
differences are between the IOW/R and MEMW/R strobes on these boards.  
Are they functionally equivalent but just allow the mapping of a device 
to a different region?

Also, is the ISA_OSC clock syncronized with the data/addr?  


Thanks.






 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/ts-7000/

<*> To unsubscribe from this group, send an email to:
    

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/

[More with this subject...]

<Prev in Thread]	Current Thread	[Next in Thread>
[ts-7000] PC/104 -- MEM/IO Strobes & Clock, Tarun Tuli <=

Previous by Date:	Re: [ts-7000] Re: loading a modified redboot, Bob Lees
Next by Date:	Re: [ts-7000] Re: ISA_OSC frequency?, Curtis Monroe
Previous by Thread:	[ts-7000] WORKING WITH FLASH N EEPROM ON 7250, shanewarne777
Next by Thread:	[ts-7000] TS-ISO485 Half Duplex - Working C Code Example Request, J
Indexes:	[Date] [Thread] [Top] [All Lists]

Admin

Disclaimer: Neither Andrew Taylor nor the University of NSW School of Computer and Engineering take any responsibility for the contents of this archive. It is purely a compilation of material sent by many people to the birding-aus mailing list. It has not been checked for accuracy nor its content verified in any way. If you wish to get material removed from the archive or have other queries about the archive e-mail Andrew Taylor at this address: andrewt@cse.unsw.EDU.AU