Hi Dave,
I am trying to log on form the Ethernet port and have exactly the same initialisation done, when the console is set to /dev/ttyAM0. I want to run /dev/ttyAM0 with a different baudrate setting, and connect to a serial device.
I have commented out the lines in inittab, or modified them from respawn to runonce. I noticed that this makes a difference in the way my application runs in that I can not insmod certain modules. Which is why I am asking this question.
How about this question, maybe you can help here. On which startup script should I modify the default eth0 address?. I would like to add ifconfig eth0 x.x.x.x
Thanks!.
Dave Cramer <> wrote:
Not exactly sure what you are doing or not doing, but this should be as simple as commenting out the line in inittab and rebooting.I do it all the time.
Dave
On 14-Jan-06, at 11:46 PM, Onur T wrote:
Hi,
I would like to remove getty /dev/ttyAM0 from /etc/inittab so that I can use COM1 for other purposes but when I do that not everything is properly initialised.
When I disable the /dev/ttyAM0 getty launch from /etc/inittab and logon to the TS-2000 from the Network or /dev/ttyAM1 the proper boot scripts are no longer executed. How can I get the logons from Com2 behave the same ways from COM1, or even better when I disable both com ports from /etc/inittab how can I ensure that network logons will have all initialisation done as is normally done by logging on from network.
Yahoo! Photos – Showcase holiday pictures in hardcover
Photo Books. You design it and we’ll bind it!
SPONSORED LINKS
YAHOO! GROUPS LINKS