| To: | |
|---|---|
| Subject: | Re: [ts-7000] serial port woes |
| From: | Dave Cramer <> |
| Date: | Wed, 11 Jan 2006 08:42:23 -0500 |
Ok, I'm starting to see the problems with this.
on a normal linux you can do
echo foo > /dev/ttyS0
and that will write to the serial port
you can also do
cat < /dev/ttyS0
and it will sit there and wait for input from the serial port and
display it
on the 7250
neither of the above work
Dave
On 2-Jan-06, at 9:39 AM, m g wrote:
> On Sun, Jan 01, 2006 at 03:48:40PM -0500, Dave Cramer wrote:
>> Where do you see that ttyAM1 does not have flow control ?
>
> In the TS manual online (TS-7250_Rev1.2.pdf). Look at the top of
> page 7.
>
>>
>> Also I presume you disabled the login for ttyAM0 in /etc/inittab
>>
>
> Yes. Thank you, I forgot to mention this in the original post.
>
> Mike
>
>
>
> Yahoo! Groups Links
>
>
>
>
>
>
>
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|
| <Prev in Thread] | Current Thread | [Next in Thread> |
|---|---|---|
| ||
| Previous by Date: | Re: [ts-7000] How to set hardware clock, Jim Jackson |
|---|---|
| Next by Date: | Re: [ts-7000] serial port woes, Curtis Monroe |
| Previous by Thread: | Re: [ts-7000] serial port woes, m g |
| Next by Thread: | Re: [ts-7000] serial port woes, Curtis Monroe |
| Indexes: | [Date] [Thread] [Top] [All Lists] |
Disclaimer: Neither Andrew Taylor nor the University of NSW School of Computer and Engineering take any responsibility for the contents of this archive. It is purely a compilation of material sent by many people to the birding-aus mailing list. It has not been checked for accuracy nor its content verified in any way. If you wish to get material removed from the archive or have other queries about the archive e-mail Andrew Taylor at this address: andrewt@cse.unsw.EDU.AU