Re: [ts-7000] How to set hardware clock

To:
Subject:	Re: [ts-7000] How to set hardware clock
From:	Jim Jackson <>
Date:	Tue, 10 Jan 2006 09:51:16 +0000 (GMT)



On Mon, 9 Jan 2006, Po-Chih Chen wrote:

> Hi,
> when I want to change the hardware clock, I have this message
>
> Cannot access the Hardware Clock via any known method.

You've got the Realtime clock option installed?

> is this because of TS-Linux or other problem. I'm really need to have
> the right clock time to rin the blackdown J2RE1.3.1-ARM-RC1 and I don't
> want to set the date every time when it reboots. Please help, thank you.

Is you board networked? if so then you can ntpdate or if you recompile
busybox to include "rdate" you can use rdate to setup you system time.


 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/ts-7000/

<*> To unsubscribe from this group, send an email to:
    

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/

<Prev in Thread]	Current Thread	[Next in Thread>
[ts-7000] How to set hardware clock, Po-Chih Chen Re: [ts-7000] How to set hardware clock, Jim Jackson <=

Previous by Date:	Re: [ts-7000] Re: LEDs, Matthieu Crapet
Next by Date:	Re: [ts-7000] serial port woes, Dave Cramer
Previous by Thread:	[ts-7000] How to set hardware clock, Po-Chih Chen
Next by Thread:	Re: [ts-7000] Re: LEDs, Matthieu Crapet
Indexes:	[Date] [Thread] [Top] [All Lists]

Disclaimer: Neither Andrew Taylor nor the University of NSW School of Computer and Engineering take any responsibility for the contents of this archive. It is purely a compilation of material sent by many people to the birding-aus mailing list. It has not been checked for accuracy nor its content verified in any way. If you wish to get material removed from the archive or have other queries about the archive e-mail Andrew Taylor at this address: andrewt@cse.unsw.EDU.AU