ts-7000
[Top] [All Lists]

[ts-7000] Re: "dev/dsp" not found

To:
Subject: [ts-7000] Re: "dev/dsp" not found
From: "pickanameanditstakensoihavethis" <>
Date: Wed, 04 Jan 2006 17:13:37 -0000
--- In  ragin shah <> wrote:
>
its not just a adc that is needed , you need a ac97 codec
the  ts7250 suports what is needed at its end for it 
see http://en.wikipedia.org/wiki/AC97 for a discription
a suitable chip would be
http://www.analog.com/en/prod/0,2877,AD1981B,00.html
if you where into building one and sort out the connections to the
ts7250 , easier to use a usb audio dongle for that 

Dave

> 
> Hi ! Jesse off!
> Thnaks for reply. As u said that i required USB with
> audio support.
> But I have ts7250 board with additional 8-channel A/D
> converter(max197 chip). So, I think i would be able to
> connect audio input directly to the max197 chip. If i
> m wrong then please let me know. 
> Now , my doubt is how to enable this ac97 support in
> software as my SIP application requires devices like
> "/dev/dsp". So ,How to enable this support as far as
> Linux & software part is concerned.
> Waiting for ur reply ! 
> Thanks in advance !
> --- Jesse Off <> wrote:
> 
> 
> ---------------------------------
> The CPU has AC97 support, but you still need a codec
> chip, some analog
> support components, and some sort of audio connector
> to make sound. 
> The TS-7xxx boards do not have this.  This would
> increase board area
> and cost well above the next-best solution which is a
> $9.95 USB-based
> audio dongle.  USB-audio is not so bad as it just
> happens to be one of
> those future proof USB devices since it was
> standardized in the USB
> specification and has multiple equivalent suppliers in
> the market.
> (unlike USB wifi) 
> 
> //Jesse Off
> 
> --- In  "shahragin1"
> <> wrote:
> >
> > I have ts-7250 developement board.I m running SIP
> application on it 
> > to make a voip call.After running application,
> logical channel is 
> > established.But,after some time it shows error like
> "/dev/dsp" not 
> > found. This board has built-in ac97 support. So ,can
> anybody please 
> > help me in solving this error. 
> > Thanks in advance!
> >
> 
> 
> 
> 
> 
>   
>     
> ---------------------------------
>   YAHOO! GROUPS LINKS
> 
>   
>     Visit your group "ts-7000" on the web.
>    
>     To unsubscribe from this group, send an email to:
>  
>    
>     Your use of Yahoo! Groups is subject to the Yahoo!
> Terms of Service.
> 
>   
> ---------------------------------
> 
> 
> 
> 
> 
>               
> __________________________________________ 
> Yahoo! DSL ? Something to write home about. 
> Just $16.99/mo. or less. 
> dsl.yahoo.com
>







Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/ts-7000/

<*> To unsubscribe from this group, send an email to:
    

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/



<Prev in Thread] Current Thread [Next in Thread>
Admin

Disclaimer: Neither Andrew Taylor nor the University of NSW School of Computer and Engineering take any responsibility for the contents of this archive. It is purely a compilation of material sent by many people to the birding-aus mailing list. It has not been checked for accuracy nor its content verified in any way. If you wish to get material removed from the archive or have other queries about the archive e-mail Andrew Taylor at this address: andrewt@cse.unsw.EDU.AU