Thanks for your answers! I´ll try to work with it.
--- In "Keith Gilman" <> wrote:
>
> Not sure if this is useful or not but I chopped the button.c program
> to give an example using the FET output on the TS-7250. I've posted it
> in the files area as horn.c.
>
> -Keith
>
> --- In "Jesse Off" <> wrote:
> >
> > The output is just a FET with its gate connected to the DIO line.
> > Output a '1' to keep the FET off, output a '0' to turn the FET on and
> > it can sink 1A/30V to ground. It has no sourcing ability.
> >
> > //Jesse Off
> >
> >
> > --- In Matthieu Crapet <> wrote:
> > >
> > > You should look at the DIO Port header, there are 8 GPIO :
> > > DIO_08, DIO_09, ..., DIO_16
> > >
> > > DIO_15 DIO_08
> > > DIO_14 DIO_09
> > > 15 13 11 9 7 5 3 1
> > > +--+--+--+--+--+--+--+
> > > | |
> > > +--+--+--+--+--+--+--+
> > > 16 14 12 10 8 6 4 2
> > > 3.3V | GND
> > > DIO_16
> > >
> > > Proc pin:
> > > EGPIO_8 = DIO_08
> > > EGPIO_9 = DIO_09
> > > ...
> > > EGPIO_15 = DIO_15
> > >
> > > FGPIO_0 = DIO_16
> > >
> > > According to cirrus datasheet (TS-7200):
> > > Port EGPIO is 4ma / Pull-up
> > > Port FGPIO is 8ma / Pull-up
> > >
> > > You should also have a look at Technologic Systems
documentation, pin
> > > can source 4ma or sink 8ma.
> > >
> > > For software issues, I advice you to use a small program written
> by Jim
> > > Jackson called "adio", it will help you to manipulate io from
> > command line.
> > >
> > > Matthieu
> > >
> > >
> > >
> > > Curtis Monroe wrote:
> > >
> > > >I find it best to download the schematics in a situation like this:
> > > >
> > >
>http://www.embeddedarm.com/downloads/Schem_Mech/ts-7250_schematic.pdf
> > > >
> > > >-Curtis.
> > > >
> > > >
> > > >On October 18, 2005 08:27 pm, Fabian Alfaro wrote:
> > > >
> > > >
> > > >>I´m working with my ts-7250, and want to use the output capable of
> > > >> switching 1 Amp at 30 V, but I haven´t found any information
> about it
> > > >> except that the pin is number 4 in the DIO Header. Has someone
> worked
> > > >> with this pin or could give me some information about it?
> > > >>
> > > >> Thanks a lot,
> > > >>
> > > >> Fabián
> > > >>
> > > >>
> > > >>
> > > >>
> > > >>
> > > >>YAHOO! GROUPS LINKS
> > > >>
> > > >>
> > > >> Visit your group "ts-7000" on the web.
> > > >>
> > > >> To unsubscribe from this group, send an email to:
> > > >>
> > > >>
> > > >> Your use of Yahoo! Groups is subject to the Yahoo! Terms of
> Service.
> > > >>
> > > >>
> > > >>
> > > >>
> > > >
> > > >
> > > >
> > > >
> > > >Yahoo! Groups Links
> > > >
> > > >
> > > >
> > > >
> > > >
> > > >
> > > >
> > > >
> > > >
> > > >
> > > >
> > >
> >
>
------------------------ Yahoo! Groups Sponsor --------------------~-->
Get Bzzzy! (real tools to help you find a job). Welcome to the Sweet Life.
http://us.click.yahoo.com/A77XvD/vlQLAA/TtwFAA/CFFolB/TM
--------------------------------------------------------------------~->
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|