I find it best to download the schematics in a situation like this:
http://www.embeddedarm.com/downloads/Schem_Mech/ts-7250_schematic.pdf
-Curtis.
On October 18, 2005 08:27 pm, Fabian Alfaro wrote:
> I´m working with my ts-7250, and want to use the output capable of
> switching 1 Amp at 30 V, but I haven´t found any information about it
> except that the pin is number 4 in the DIO Header. Has someone worked
> with this pin or could give me some information about it?
>
> Thanks a lot,
>
> Fabián
>
>
>
>
>
> YAHOO! GROUPS LINKS
>
>
> Visit your group "ts-7000" on the web.
>
> To unsubscribe from this group, send an email to:
>
>
> Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.
>
>
------------------------ Yahoo! Groups Sponsor --------------------~-->
Get Bzzzy! (real tools to help you find a job). Welcome to the Sweet Life.
http://us.click.yahoo.com/A77XvD/vlQLAA/TtwFAA/CFFolB/TM
--------------------------------------------------------------------~->
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|