| To: | |
|---|---|
| Subject: | Re: [ts-7000] PL2303 USB converter |
| From: | Daniel Smolik <> |
| Date: | Fri, 16 Sep 2005 13:46:41 +0200 |
alipiec napsal(a):
> I tried to run USB-RS232 converter based on Prolific PL2303 to get
> additional RS functionality but it didn't work.
> I've done:
> - insmod usbcore
> - insmod usbserial
> - insmod pl2303
>
> And neither /dev/ttyUSB0 device were created nor USB converter worked.
> What should I do to make it work?
Type dmesg and send a output I use USB->485 converter with FTDI
without problem.
Dan
------------------------ Yahoo! Groups Sponsor --------------------~-->
Most low income households are not online. Help bridge the digital divide today!
http://us.click.yahoo.com/cd_AJB/QnQLAA/TtwFAA/CFFolB/TM
--------------------------------------------------------------------~->
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|
| <Prev in Thread] | Current Thread | [Next in Thread> |
|---|---|---|
| ||
| Previous by Date: | [ts-7000] PL2303 USB converter, alipiec |
|---|---|
| Next by Date: | [ts-7000] Re: PL2303 USB converter, alipiec |
| Previous by Thread: | [ts-7000] PL2303 USB converter, alipiec |
| Next by Thread: | [ts-7000] Re: PL2303 USB converter, alipiec |
| Indexes: | [Date] [Thread] [Top] [All Lists] |
Disclaimer: Neither Andrew Taylor nor the University of NSW School of Computer and Engineering take any responsibility for the contents of this archive. It is purely a compilation of material sent by many people to the birding-aus mailing list. It has not been checked for accuracy nor its content verified in any way. If you wish to get material removed from the archive or have other queries about the archive e-mail Andrew Taylor at this address: andrewt@cse.unsw.EDU.AU