| To: | |
|---|---|
| Subject: | [ts-7000] PL2303 USB converter |
| From: | "alipiec" <> |
| Date: | Fri, 16 Sep 2005 11:33:51 -0000 |
I tried to run USB-RS232 converter based on Prolific PL2303 to get additional RS functionality but it didn't work. I've done: - insmod usbcore - insmod usbserial - insmod pl2303 And neither /dev/ttyUSB0 device were created nor USB converter worked. What should I do to make it work? Alus ------------------------ Yahoo! Groups Sponsor --------------------~--> Get Bzzzy! (real tools to help you find a job). Welcome to the Sweet Life. http://us.click.yahoo.com/A77XvD/vlQLAA/TtwFAA/CFFolB/TM --------------------------------------------------------------------~-> Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/ts-7000/ <*> To unsubscribe from this group, send an email to: <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/ |
| <Prev in Thread] | Current Thread | [Next in Thread> |
|---|---|---|
| ||
| Previous by Date: | Re: [ts-7000] RAM disk, Jorge Canelhas |
|---|---|
| Next by Date: | Re: [ts-7000] PL2303 USB converter, Daniel Smolik |
| Previous by Thread: | [ts-7000] Using DIO to switch relays, Yan Seiner |
| Next by Thread: | Re: [ts-7000] PL2303 USB converter, Daniel Smolik |
| Indexes: | [Date] [Thread] [Top] [All Lists] |
Disclaimer: Neither Andrew Taylor nor the University of NSW School of Computer and Engineering take any responsibility for the contents of this archive. It is purely a compilation of material sent by many people to the birding-aus mailing list. It has not been checked for accuracy nor its content verified in any way. If you wish to get material removed from the archive or have other queries about the archive e-mail Andrew Taylor at this address: andrewt@cse.unsw.EDU.AU