Ed,
The ep93xx_eth.c files are the same.
In the configuration file I'm using.
CONFIG_ARCH_EP9301=y is set as system. I guess this is true since the board
is based on an emulator by that name?
CONFIG_EP93XX_ETHERNET=y if the ethernet adapter is the same also?
I'm compiling the kernel on the board itself (1GB flash card TS provided m).
Can you post the Makefile for the kernel build , perhaps a makeconfig
configuration file as well and anything else that may be helpful?
Since bluetooth tty CONFIG_BLUEZ_RFCOMM_TTY was supported there,
the default kernel configuration looked good. It's for this feature I'm
recompiling the
kernel.
Jim
--- In "Eddie Dawydiuk" <> wrote:
> Hi Jim,
>
> > However, make bzImage bombs out making ep93xx_eth:
>
> Have you changed the ep93xx.c driver? I have posted the version I have(in
> the files section), you might want to run diff on your version to see if
> anything is different... Let me know if the files are the same.
>
> //Eddie
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|