[ts-7000] Re: rebuilding kernel

["jimmaiul" <>]

Ed, 
  Before I can rebuild the kernel, I need some direction  
on how to reformat & re-install the root file system on CF. The 1GB 
CF from TS went bad. I suspect this is why the TFTP boot didn't 
complete (from the TS ARM linux developers manual) using the zImage 
you provided in ftp://oz.embeddedx86.com/ts7250_ts8.tar.gz. 
 
Jim  
 
--- In  "Eddie Dawydiuk" <> wrote: 
> Jim, 
>  
> Sorry for not responding sooner... 
>  
> > In the configuration file I'm using. 
> > CONFIG_ARCH_EP9301=y  is set as system. I guess this is true 
since the 
> > board is based on an emulator by that name? 
>  
> The CPU on the board is an EP9302(very similiar to EP9301). 
>  
> > CONFIG_EP93XX_ETHERNET=y  if the ethernet adapter is the same 
also? 
>  
> This is for the ethernet on the EP9302. 
>  
> > I'm compiling the kernel on the board itself (1GB flash card TS 
provided 
> > m). 
> > Can you post the Makefile for the kernel build , perhaps a 
makeconfig 
> > configuration file as well and anything else that may be 
helpful? 
>  
> The Makefile is included in the kernel source code you can get it 
from 
> 
here(ftp://ftp.embeddedarm.com/downloads/Linux/ARM/linux24_ts8_src.tar.gz). 
> The .config file is in the kernel source in 
arch/arm/def-configs/ts7250. 
>  
> > Since bluetooth tty CONFIG_BLUEZ_RFCOMM_TTY was supported there, 
> > the default kernel configuration looked good. It's for this 
feature I'm 
> > recompiling the kernel. 
>  
> From looking at the config file it looks like this is enabled by 
default 
> also. 
>  
> ie 
>  
> # Bluetooth support 
> # 
> CONFIG_BLUEZ=m 
> CONFIG_BLUEZ_L2CAP=m 
> CONFIG_BLUEZ_SCO=m 
> CONFIG_BLUEZ_RFCOMM=m 
> CONFIG_BLUEZ_RFCOMM_TTY=y 
> CONFIG_BLUEZ_BNEP=m 
>  
> Assuming I understood your requirements correctly then you don't 
even need 
> to compile your own kernel you can get a precompiled one from 
> here(ftp://oz.embeddedx86.com/ts7250_ts8.tar.gz). 
>  
> //Eddie 





 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/ts-7000/

<*> To unsubscribe from this group, send an email to:
    

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/