[ts-7000] Re: getting started with TS-SER4 daughtercard

["vocemanago" <>]

--- In  "vocemanago" <> wrote:
> 
> In my serial.conf file I have...
> 
> # These are the standard COM1 through COM4 devices
> #
> /dev/ttyS0 uart 16550A port 0x89C003F8 irq 40
> /dev/ttyS1 uart 16550A port 0x89C002F8 irq 33
> /dev/ttyS2 uart 16550A port 0x89C003E8 irq 40
> /dev/ttyS3 uart 16550A port 0x89C002E8 irq 33
> 
> This is using the development Flash card of course, in your case you
> would be using a development USB flash drive.
> 
> T.
I made a mistake somewhere. I started back through my emails with
technologic. There was an update to the kernel, which I don't know if
you have or not and then the enumeration was backwards from above.
/dev/ttyS0 is irq 33
/dev/ttyS1 is irq 40
/dev/ttyS2 is irq 33
/dev/ttyS3 is irq 40

I think, 
I went around in circles with this one, but finally got the board to work.
T.





 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/ts-7000/

<*> To unsubscribe from this group, send an email to:
    

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/