| To: | |
|---|---|
| Subject: | [ts-7000] Re: getting started with TS-SER4 daughtercard |
| From: | "vocemanago" <> |
| Date: | Fri, 01 Apr 2005 13:00:02 -0000 |
--- In "massimotiribelli" <> wrote:
>
>
> I have connected a TS-SER4 to my TS7250.
>
> TS-BOOTROM is telling me:
> Off-board serial at: COM5 COM6 COM7 COM8
>
> How can i see this serial ports from linux?
> Which procedure can i execute to get working the new serial ports?
>
> Thanks.
>
> MT
Well, make sure you have a jumper on COM1 , IRQ2, IRQ4 and
2-IRQs....nothing else.
I think there was an issue with the interrupts in the kernel...they
were swapped or something.
they will become ttyS0 to ttyS3 in the /dev directory.
Ill try to scrape up more when I get a chance.
T.
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|
| <Prev in Thread] | Current Thread | [Next in Thread> |
|---|---|---|
| ||
| Previous by Date: | [ts-7000] getting started with TS-SER4 daughtercard, massimotiribelli |
|---|---|
| Next by Date: | [ts-7000] Re: getting started with TS-SER4 daughtercard, vocemanago |
| Previous by Thread: | [ts-7000] getting started with TS-SER4 daughtercard, massimotiribelli |
| Next by Thread: | [ts-7000] Re: getting started with TS-SER4 daughtercard, vocemanago |
| Indexes: | [Date] [Thread] [Top] [All Lists] |
Disclaimer: Neither Andrew Taylor nor the University of NSW School of Computer and Engineering take any responsibility for the contents of this archive. It is purely a compilation of material sent by many people to the birding-aus mailing list. It has not been checked for accuracy nor its content verified in any way. If you wish to get material removed from the archive or have other queries about the archive e-mail Andrew Taylor at this address: andrewt@cse.unsw.EDU.AU