ts-7000
[Top] [All Lists]

[ts-7000] Re: getting started with TS-SER4 daughtercard

To:
Subject: [ts-7000] Re: getting started with TS-SER4 daughtercard
From: "vocemanago" <>
Date: Fri, 01 Apr 2005 13:13:01 -0000

In my serial.conf file I have...

# These are the standard COM1 through COM4 devices
#
/dev/ttyS0 uart 16550A port 0x89C003F8 irq 40
/dev/ttyS1 uart 16550A port 0x89C002F8 irq 33
/dev/ttyS2 uart 16550A port 0x89C003E8 irq 40
/dev/ttyS3 uart 16550A port 0x89C002E8 irq 33

This is using the development Flash card of course, in your case you
would be using a development USB flash drive.

T.





 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/ts-7000/

<*> To unsubscribe from this group, send an email to:
    

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/
 



<Prev in Thread] Current Thread [Next in Thread>
Admin

Disclaimer: Neither Andrew Taylor nor the University of NSW School of Computer and Engineering take any responsibility for the contents of this archive. It is purely a compilation of material sent by many people to the birding-aus mailing list. It has not been checked for accuracy nor its content verified in any way. If you wish to get material removed from the archive or have other queries about the archive e-mail Andrew Taylor at this address: andrewt@cse.unsw.EDU.AU