| To: | |
|---|---|
| Subject: | [ts-7000] RTC info - manual |
| From: | "alipiec" <> |
| Date: | Thu, 24 Mar 2005 10:06:06 -0000 |
In manual regarding TS-7200 there's a chapter about RTC. The information says about M48T86PC1 module, but in real RTC for TS72x0 is based on MAXIM 1678 chip which is quite different (as seen on http://www.embeddedarm.com/images/72stcllw.jpg). Spec: http://pdfserv.maxim-ic.com/en/ds/DS1678.pdf Is this a mistake in manual? Best regards Alus Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/ts-7000/ <*> To unsubscribe from this group, send an email to: <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/ |
| <Prev in Thread] | Current Thread | [Next in Thread> |
|---|---|---|
| ||
| Previous by Date: | Re: [ts-7000] Com2 was Usbserial can't open tty line, Jim Jackson |
|---|---|
| Next by Date: | Re: [ts-7000] Watchdog: PLD vs EP9302, Andy Gryc |
| Previous by Thread: | [ts-7000] Promiscous mode?, andygryc |
| Next by Thread: | Re: [ts-7000] RTC info - manual, Jesse Off |
| Indexes: | [Date] [Thread] [Top] [All Lists] |
Disclaimer: Neither Andrew Taylor nor the University of NSW School of Computer and Engineering take any responsibility for the contents of this archive. It is purely a compilation of material sent by many people to the birding-aus mailing list. It has not been checked for accuracy nor its content verified in any way. If you wish to get material removed from the archive or have other queries about the archive e-mail Andrew Taylor at this address: andrewt@cse.unsw.EDU.AU
